High performance light stabilizer for coatings
In this article we highlight the performances of our Omnistab LS 123. This product is a liquid hindered amine light stabilizer of amino ethers. It provides outstanding light stability in coatings and has a low alkalinity. The burnish disappear, so it can avoid reaction with the acid composition in coatings. And it also prevent colored paint from pulverization. Due to the liquid form, the Omnistab LS 123 is suitable for both waterborne and solvent based coatings.
Applications
Its excellent performance reflect in the following applications:
- Alkyd resin / acrylate air-dry automobile repair paint
- Oxidized alkyd paints and varnishes
- Two-component non-isocyanate coating
- It is easy to emulsify in the water-based coating system and can also be used in water-based coatings
- Synergistic performance with other Light Stabilizers & UV absorbers
Industries
Recommended industries for the high performance light stabilizer: automotive coatings, industrial coatings, decorative coatings, wood coatings and varnishes. Especially the ones with high solid content and acid-catalyzed; such as double-coated metal thermosetting acrylic systems or single-layer thermosetting acrylic varnish and polyester systems.
Recommended combinations
For more comprehensive protection we recommend to combine the light stabilizer with an ultraviolet absorber. For automotive coatings, the combination of Omnistab LS 123 with one of the following absorbers can significantly improve the weather resistance: Omnistab UV 384-2, Omnistab UV 1130, Omnistab UV 928 or Omnistab UV 400. It effectively prevent gloss loss, cracking, color change, bubbles and delamination. In double coating systems, most manufactures use light stabilizers in primers and topcoats. For wood coating, the combination of Omnistab LS 123 and Omnistab UV 384-2 or Omnistab UV 1130 has a good protective effect on air-dry alkyd paint. Light stabilizer mixtures commonly added to the film and decorative paints.
Recommended dosage
Automotive paint and industrial paint: 0.5-2.0%* Omnistab LS 123 + 1.0-3.0% Omnistab UV 1130 / UV 384-2 /UV 928 / UV 400
Decorative coating and wood coating: 0.5-2.0%* Omnistab LS 123 (use alone) or + 1.0-3.0% Omnistab UV 1130 / UV 384-2
*You can determine the optimal dosage by trial (relative to resin solids).
For more technical product details about this Omnistab LS 123, see our product data sheet.
Temperature resistant anti oxidant
An excellent temperature resistant anti oxidant is the Omnistab AN 80. The organic combination of…
PP Fibers
Looking for more stability of your PP fibers? Our Omnistab LS 119 is the right…
PE wax
In this article we will explain the characteristics and features of polyethylene wax (PE wax)….
Evaluation of new light stabilizers
Choosing your product among all available light stabilizers in the market is challenging. Based on…
Light stabilizer 2020
As of June 2020, we expand our product range with the development of, ironically, Light…
Sustaining Textile
Producing sustainable products is a hot topic. Especially in the field of clothes, it all…
Prolong the lifecycle of your engineering plastics
Engineering plastics instead of metal? Yes we can. In this article we will explain why…
UV absorbers in cosmetic industry
Sunscreen is an eternal topic in cosmetics, but it cannot exist without UV absorbers in…
Chinaplas 2021
Under current circumstances of the COVID-9, the Chinaplas will be postponed again. The 34th Chinaplas…
Omnistab Additives in Water-based Coatings
Water-based coating are coatings that uses water as a diluent and does not contain organic…
Corona virus
In this news letter we give you an update regarding to the latest Corona virus…
Additives for polyolefins
Polyolefin is a type of polymer of olefins. For example, polypropylene or polyethylene. In this…
Principles of stabilizers
Light stabilizers are important additives in rubber and plastic applications. In this article we focus…
Happy Chinese New Year
It has been a pleasure to work with you this year, we wish you a…
Anti yellowing agents
We launched two anti yellowing agents, Omnistab HN 130 & Omnistab HN 150. Both are…
Happy holidays
On behalf of our team: we wish you happy Holidays, all the best to you…
Comparison test PA6 with Omnistab LS 5519
In October we introduced the new light stabilizer for Polamide (PA); Omnistab LS 5519. To…
Light stabilizer for nylon – Omnistab LS 5519
Omnistab LS 5519 is a highly efficient light stabilizer for nylon. For example, polyamide (PA)….
K fair 2019 in Düsseldorf
Your global Partners in Chemicals will be exhibiting at the upcoming K fair in Düsseldorf…
Liquid Anti Oxidant
In the world of additives you see a large group of anti oxidants in powder, granular and flake form. However, if you are looking for a liquid anti oxidant
UV absorber for agriculture film
There are many different UV absorbers, but there is one that really stands out if…
Natural Rubber Latex
Since the start of Partners in Chemicals we offer the market Natural Rubber Latex. Natural…
Explosion Eastern China
An explosion at a pesticide plant in eastern China is the latest in a series…
End of cooperation with the NRC Group
Partners in Chemicals has decided, in mutual agreement with Nordmann Rassmann (NRC), to end our…
Evaluation of three UV absorbers
In this article we evaluate three different UV absorbers. They have advantages and associated characteristics….
Near Infrared Absorber for Laser Beam Welding
Laser Technology Laser technology was originally used in 1970 to weld plastic film with CO2…
Update on chemical factory closures in China
The main purpose of China’s “Cease-Work Orders” is to optimize the atmospheric environment and control…
Introducing N3coat
It’s all about people “I believe in an honest and open way of doing business….
Omnistab NIR LW
The right laser absorber The diode laser has a wavelength of 800 ~ 1000nm and…
How to stop the yellowing of polyurethane flexible foam
A great number of manufacturers, including those that make high-grade sponge, have tried different solutions….
Liquid triazine UV absorber
Omnistab UV 400 is a liquid triazine UV absorber for coating products. We specially developed…
Chinaplas 2017
Partners in Chemicals presents Together with Longquan Chemicals, our booth in Hall 9.3 on stand…
Daniel Knegt
ITU WPS Gold Coast Recently he participated in the ITU WPS Gold Coast with his…
OMNISTAB UV 1600
Therefore, polymer additives are essential during manufacturing processes. It safeguards the exquisite look of surfaces…
Restrain on Chinese chemical production
The Chinese government started a straightforward campaign to decrease water pollution to control the waste…
ICG Specialty Group expands portfolio
The ICG Specialty Group is a global supplier of polymer additives whose proprietary Omnistab brand…
European Coatings Show 2016
During the European Coatings show we also showed the new generation product: Omnistab NIR. Its…
New environmental laws implemented
Why is the Chinese Chemical industry struggling? “There is still large gap in result between…
Introducing partnership with Deltachem
A Chinese partner of choice “We work with people from the Netherlands, China, Israel, Dubai,…
UTRECHT
In 2007 we decided to start ICG Specialty Chemicals selling specialty chemicals and additives under the tradename Omnistab.
DUBAI
Partners in Chemicals expanded its business in Middle East by setting up a branch office in Dubai in 2014.
Our Dubai office gives direct access to the Middle East and Africa. Having warehousing facility in the Dubai Free Zone makes it much easier to import, stock and re-export material to different destinations around the globe.
CHICAGO
To serve the American market we have set up our Chicago branch office in 2009.
QINGDAO
Deltachem (Qingdao) Co. Ltd. has been established in 2012 but general manager Mr. Mike Zou is already since 2007 a business partner for the Omnistab range.
Deltachem is the partner of Choice for Partners in Chemicals.
Besides being responsible for sourcing new products, supplychain and quality controle Deltachem is also managing the production facilities and handles the technical support.
